Mfg By: Fromm
Part ID: FRM-766

Sleek, lightweight cutting tool. 5" with detachable rest. Also available in 5½" #767, 6" #768, 6" 42-tooth thinner #769.

Mfg By: Arius Eickert/Cutrite
Part ID: 8522

Iris Scissors Stainless forged steel, finely ground pointed tips. 8522 is pictured. Ideal for close tolerance cutting, lab, electronics, embroidery. #8522C-3 3 1/2” Curved Blade #8522 4” Straight Blade; #8522C 4” Curved Blade 1 1/8” Cut

Mfg By: Fromm
Part ID: FRM-786

Basic, stainless steel haircutting shears. Comfortable, molded handles. 5¾"with permanent rest.

Mfg By: Arius Eickert/Cutrite
Part ID: 8010

Comfort Pointed Scissor Stainless steel stamped scissors with molded poly-comfort handles. 0.155” thick blades. Ideal for fibers, thread, paper, etc. Available in #8010 5” - 2” Cut

Mfg By: Fromm
Part ID: FRM-551

FROMM #551 5 3/4" inc. Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-550

FROMM #550 5 1/4" No Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-788

FROMM #788 6 1/2" 30 Tooth Thinner LIMITED QTYS

Mfg By: Arius Eickert/Cutrite
Part ID: 2608

3.5" Stork Scissor, Used for nailwrap, china silk, and embroidery. Made in Europe. Beautiful gold plating. Looks good and cuts great!

Mfg By: Fromm
Part ID: FRM-790

Serrated beveled blades. 28-tooth thinner. Offset handles. 6" with permanent, molded, finger rest. Also available in 5½" #791

Mfg By: Arius Eickert/Cutrite
Part ID: 8222

Open Bow Curved Iris Scissors Stamped stainless steel with vinyl coated handles that open and close to fit any thumb or finger. Precision tips. One edge is serrated. Long life, excellent steel. Ideal for close tolerance cutting, embroidery, fly tying, etc. (8222C 4” is pictured) #8222C-3 3” Curved Blade; #8222C 4” Curved Blade 7/8” Cut

Mfg By: Gingher
Part ID: G-S4

Embroidery scissors are basic necessities for every sewing and needle arts enthusiast. Gingher’s Lightweight Embroidery scissors have strong stainless steel blades for precision cutting all the way to the points. Specially contoured handles made of lightweight black molded nylon, are comfortable for either left or right hand users. Use a screwdriver to adjust tension.

Mfg By: Fromm
Part ID: FRM-199

FROMM #199 5 3/4" Adj Finger LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-198

FROMM #198 5 1/4" ADJ. FINGER LIMITED QTYS

Mfg By: Fiskars
Part ID: 9801-7097

Mfg By: Arius Eickert/Cutrite
Part ID: xxxx

The very fine tips spire tips, with the reinforced thicker blade make this one of our most popular cuticle scissors. Curved blades. High carbon steel, nickle plated. The blunted tip option is ideal for baby nail cutting. For a heavier version, refer to the medium weight 2601 scissor.

Mfg By: Arius Eickert/Cutrite
Part ID: 2708

The very fine tips spire tips, with the reinforced thicker blade make this one of our most popular cuticle scissors. Curved blades. High carbon steel, nickle plated. The blunted tip option is ideal for baby nail cutting. For a heavier version, refer to the medium weight 2601 scissor.

Mfg By: Fiskars
Part ID: 9802-7097

Mfg By: Gingher
Part ID: G-LT

3 1/2 inch lion's tail embroidery scissors, nickel-plated blades, gold-plated handles, packaged in hangbag with fitted leather sheath

In these scissors the attractive lion's tail design has been produced with careful attention to artistic detail. The slender blades and fine, sharp points offer capability to reach into tight places - Gingher craftsmanship assures a sharp cut all the way to the points. Suggested usage is for thread cutting only.

Mfg By: Gingher
Part ID: G-ST

3 1/2 inch Storkembroidery scissors, nickel-plated blades, gold-plated handles, with fitted leather sheath

In these scissors the attractive lion's tail design has been produced with careful attention to artistic detail. The slender blades and fine, sharp points offer capability to reach into tight places - Gingher craftsmanship assures a sharp cut all the way to the points. Suggested usage is for thread cutting only.

Mfg By: Gingher
Part ID: G-ET

3 1/2 inch epaulette embroidery scissors, nickel-plated blades, gold-plated handles, with fitted leather sheath

In these scissors the attractive lion's tail design has been produced with careful attention to artistic detail. The slender blades and fine, sharp points offer capability to reach into tight places - Gingher craftsmanship assures a sharp cut all the way to the points. Suggested usage is for thread cutting only.

Mfg By: Gingher
Part ID: G-FL

3 1/2 inch fleur-de-lis embroidery scissors, nickel-plated blades, gold-plated handles, with fitted leather sheath

In these scissors the attractive lion's tail design has been produced with careful attention to artistic detail. The slender blades and fine, sharp points offer capability to reach into tight places - Gingher craftsmanship assures a sharp cut all the way to the points. Suggested usage is for thread cutting only.

Mfg By: Arius Eickert/Cutrite
Part ID: 5080

All leather holster for around the waist or over the shoulder. 4 sleeves for scissors and combs. Snap on belt. Wear the holster with the cover flap behind the holster, so it is out of the way while you work!

Mfg By: Fromm
Part ID: FRM-869

FROMM #869 7" w/ Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-859

FROMM #859 5 3/4" w/ Rest LIMITED QTYS

Mfg By: Arius Eickert/Cutrite
Part ID: 8100

Cardinal Comfort Shear Available in 4.5", 5", 5" Lefty, or 6"

Mfg By: Gingher
Part ID: G-4PS

Both children and adults can use Gingher’s 4 inch Safety Point Scissors for flawless cutting and protection from sharp points. Children can safely complete their projects without the frustration of dull, poorly made scissors. Safety scissors are also handy in pockets or purses. Confirm current security restrictions before bringing safety scissors on a commercial airline flight. A double-plated chrome finish over nickel is both handsome and durable.

Mfg By: Gingher
Part ID: G-4KE

4 inch knife edge sewing scissors, chrome over nickel plated, packaged in hangbag with fitted leather sheath

This versatile item is capable of cutting through layers of material because it is ground with a knife edge on one blade. The shorter blades of this model make it excellent for cutting intricate patterns. The knife edge can be kept sharp with our G-S sharpening stone.

Mfg By: Gingher
Part ID: G-6PSW

These Safety Point Scissors have large handles designed so fingers can work with comfort and ease. The 6 inch scissors has a longer cut ideal for crafts or office use. The scissors can be carried conveniently in purses or craft bags. Confirm current security restrictions before bringing safety scissors on a commercial airline flight. A double-plated chrome finish over nickel is both handsome and durable.

Mfg By: Fromm
Part ID: FRM-780

Silencing bumper. Chrome-plated, zinc semi-offset handles. 5¼" with detachable rest Also available in 5¾" 30-tooth thinner #781, 5¾" #782, 7" #783

Mfg By: Gingher
Part ID: G-5

5 inch knife edge sewing scissors, chrome over nickel plated, packaged in hangbag with fitted leather sheath

This versatile item is capable of cutting through layers of material because it is ground with a knife edge on one blade. The shorter blades of this model make it excellent for cutting intricate patterns. The knife edge can be kept sharp with our G-S sharpening stone.

Mfg By: Gingher
Part ID: G-5C

5 inch knife edge craft scissors, chrome over nickel plated, packaged in hangbag with fitted leather sheath

This versatile item is capable of cutting through layers of material because it is ground with a knife edge on one blade. The shorter blades of this model make it excellent for cutting intricate patterns. The knife edge can be kept sharp with our G-S sharpening stone.

Mfg By: Fromm
Part ID: FRM-865

FROMM #865 5 3/4" 30 Tooth Thinner LIMITED QTYS

Mfg By: Arius Eickert/Cutrite
Part ID: 9144SW

Ergonomic Carpal Pocket Scissors The revolutionary Carpal ScissorTM alleviates many of the symptoms that can cause Tendinitis & Carpal Tunnel Syndrome! The user has total freedom of the thumb, allowing it to move in a natural and ergonomic motion. This reduces the stress on the ligaments. Available in #9144SW 4”, 5” and 6”.

Mfg By: Fromm
Part ID: FRM-89L

Traditional, high quality, 40-tooth thinner. Hand-honed blades and super-polished teeth. Opposing handles. Dual, detachable finger rest option. 5¾" with detachable finger rest, lefty.

Mfg By: Fromm
Part ID: FRM-249

FROMM #249 4 1/2" w/ Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-269

FROMM #269 6 1/2" Inc. Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-289

FROMM #289 5 1/2" w/ Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM230

Mfg By: Arius Eickert/Cutrite
Part ID: 911xH

Bent Heavy Duty Trimmers Ideal for heavy textiles, canvas, plastic, fiberglass, rubber, etc. Adjustable bolt and nut assembly.

Available in:
#9110H 10” - 4 3/8” Cut
#9112H 12” - 6” Cut
#9112H-GOLD 12" 24k Gold Plated Ceremony & Ribbon Cutting Scissors

Mfg By: Fromm
Part ID: FRM-776

New micro-serrated blade won't push hair. Honed edges for cutting durability and control. Comfortable, chrome-plated, semi-offset handles 5½" with permanent rest. Also available in 6" #777, 6" 40-tooth thinner #778

Mfg By: Arius Eickert/Cutrite
Part ID: 8118

The 8118 is one of the best bargains that we offer. 420 forged surgical stainless steel, which is ice tempered for extra toughness. One edge is serrated for holding the hair, wet or dry. Excellent for layer and blunt cuts. Comes with a black rubber silencer. Available with removable finger rest: 4.5", 5", 5.5", 5.5" LEFTY, 5.5" Curved, 6", 6" Curved, 6.5", 6.5" Curved Available with forged-on finger rest: 8", 8" Curved, 10", 10" Curved

Mfg By: Gingher
Part ID: G-CS-1

3 1/2 inch hand crafted embroidery scissors, black oxide finish, packaged in gift box with fitted leather sheath

Collectors and users of these fine embroidery scissors will find them to be more functionally perfect than any other produced today. Care should be taken to avoid abusing the slender frame of the scissors in cutting fabrics and heavier yarns. We recommend this item for cutting threads only.

Mfg By: Arius Eickert
Part ID: 5087

The 5087 10 Piece Scissor Holster is for wearing around the waist. 10 sleeves for scissors and combs, with an extra LARGE pocket for brushes, clips, etc. Very roomy. Wide snap on belt. Wear the holster with the cover flap behind the holster, so it is out of the way while you work!

Mfg By: Gingher
Part ID: G-CS-2

3 1/2 inch hand crafted embroidery scissors, nickel-plated blades, gold-plated handles, packaged in gift box with fitted leather sheath

Those who invest in this beautiful collector's item will also find enjoyment in using them as an essential sewing and needlecraft tool. Suggested usage for this item is thread cutting only in order to protect the setting of its slender frame.

Mfg By: Fromm
Part ID: FRM-770

Micro-serrated blade won't push hair. Removable sizing inserts and finger rest. Semi-offset handles 5¼"with detachable rest Also available in 5¾" #771, 5¾" 28-tooth thinner #772, 6" #778

Mfg By: Fromm
Part ID: FRM-962

Mfg By: Fromm International
Part ID: Frm-1000WR

* Extra-long blades * Stainless steel * 10"

Mfg By: Gingher
Part ID: G-CS-3

3 1/2 inch hand crafted embroidery scissors, stainless steel, pewter finish, packaged in gift box with fitted leather sheath The pewter finish of this model has a particularly distinctive old world look and the stainless steel gives it the added benefit of protection from rust. The design of this item, with its slender frame, limits our suggested usage for it to thread cutting only.

Mfg By: Fromm
Part ID: FRM-85C

Lightweight design with forged handles. Unique curved ice tempered stainless blades for extra strength. One corrugated blade edge. 8½" including finger rest.

Mfg By: Gingher
Part ID: G-CS-4

3 1/2 inch hand crafted embroidery scissors, stainless steel, pewter finish, gold-plated handles, packaged in gift box with fitted leather sheath

Users of these hand crafted scissors will know both the fulfillment of having invested in the finest and the enjoyment of a precision performance available only in the highest quality produced today. This item's stainless steel offers protection from rust and the gold handles give an added quality of distinction. These fine scissors should be used only for cutting threads.

Mfg By: Fromm
Part ID: FRM-957

FROMM #957 6 1/4" w/ Det Rest LIMITED QTYS

Mfg By: Fromm
Part ID: FRM-955

FROMM #955 5 1/4" w/ Det Rest LIMITED QTY!

Mfg By: Fromm
Part ID: FRM-956

FROMM #956 5 3/4" w/ Det Rest LIMITED QTYS

Mfg By: Fromm International
Part ID: FRM-88

# Sharp, extra-hard double hollow ground blade # Ice tempered, chrome-plated steel # One corrugated blade edge # Steel handles # 8½" including finger rest

Mfg By: Fromm International
Part ID: FRM-88V

# Sharp, extra-hard double hollow ground blade # Ice tempered, chrome-plated steel # One corrugated blade edge # Attractive vinyl-coated handles # 8½" including finger rest

Mfg By: Arius Eickert
Part ID: SXB

Kit includes an assortment of washers, screws, finger rests, bumpers & etc.

Mfg By: Arius Eickert
Part ID: 8480

Spiking, Wisping, Textuing. Add life, body and texture into hairstyles. This 5.5" 5 tooth scissor achieves a higher effect for dramatic texture. Ergonomic lightweight alloyed handles. Popular sweeping handles allows smooth, comfortable cutting.

Mfg By: Arius Eickert/Cutrite
Part ID: 8143

The 8143 Tango scissors have butterfly ergonomic handles making this shear a great tool that feels comfortable all day long! The two piece blade and slotted screw system is composed of stamped 440 Stainless blades and cast handles which allow sharp, smooth usage.

Mfg By: Fromm International
Part ID: FRM-88VC

# One standard blade, one serrated blade, curved # Vinyl comfort handle # Ice tempered stainless steel # 8½" with permanent finger rest

Mfg By: Fromm
Part ID: FRM-958

Mfg By: Arius Eickert/Cutrite
Part ID: 8141

Razor sharp edges with a deep hollow grind for a super smooth cut and run. Offset ergonomic handles for comfort. Good for all haircutting styles, wet or dry. Stamped high carbon 420 Stainless Steel blades for durability. Contour cast handles for comfort.

Mfg By: Fromm
Part ID: FRM-760

Precise, soft cutting. Semi-offset handles. Sterling finish. 5½" with detachable rest Also available in 5½" 28-tooth thinner #761, 6" #762, 5" #763.

Mfg By: Fromm International
Part ID: FRM-93S

# Opposing handle design # Perfect for blending and light texturizing # One finely honed cutting edge # Made in Germany # 32-tooth # 6"

Mfg By: Arius Eickert
Part ID: Simply Pink

A dynamic duo for all haircutting styles, wet or dry! High-carbon 440 stainless steel blades provide long lasting razor sharp edges. The cutting shears have deep hollow-ground edges for super smooth cuts. The blending shears eliminate lines and steps and make light texturizing easy. Contoured, offset ergonomic handles provide extra comfort for holding and cutting.

Mfg By: Fromm
Part ID: FRM-815L

Mfg By: Arius Eickert/Cutrite
Part ID: 8331

Feel the smooth precision of this scissor! Convex edges, triple hand honed and hollow ground.

Mfg By: Arius Eickert
Part ID: 8331

Feel the smooth precision of this scissor! Convex edges, triple hand honed and hollow ground. Available in 5" and 6".

Mfg By: Fromm
Part ID: FRM-501

Mfg By: Fromm
Part ID: FRM-502

Mfg By: Fromm
Part ID: FRM-503

Mfg By: Fromm
Part ID: FRM-504

40-tooth thinner. Hypoallergenic, permanent titanium infusion increases strength and cutting life. Hand-honed, hollow-ground blades. Opposing handles. 5 1/2" with detachable finger rest.

Mfg By: Fromm
Part ID: FRM-ES40L

Mfg By: Arius Eickert
Part ID: 8141SW

Alloyed ergonomic offset handles make this scissor extremely light and easy to use. Honed hollow blades give this scissor its sharp, smooth and quiet run. Stamped stainless blades and cast handles. Available in 5.75" only.

Mfg By: Arius Eickert/Cutrite
Part ID: 1480

Spiking, chunking, texturizing. Add life, body and texture into hairstyles. This 5.5" - 5 tooth scissor achieves a higher effect for dramatic texture. A unique and exciting addition to your professional styling tools.

Mfg By: Arius Eickert/Cutrite
Part ID: 1000

Used by professionals for scissor over comb cutting techniques. Fully forged from a very light and highly alloyed Vanadium Stainless Steel, these scissors have very tough, long lasting cutting edges. One blade has a polished NIFE EDGETM, the other is micro-serrated for extra hold. Our top of the line German style scissor. Available in: 1009-5", 1010-5.5", 1011-6", 1012-6.5", 1013-7", 1303-5.5" LEFTY. The 1011, 1012 & 1013 are very popular barbering shears.

Mfg By: Arius Eickert/Cutrite
Part ID: Gemini Special

8337 Feel the precision edge of these convex scissors. Available in: 5.5" Receive FREE Gemini Blender and 4 pc. scissor case.

Mfg By: Arius Eickert/Cutrite
Part ID: 8330

Shear delight to cut with and also great on the pocket book! All the features of the more expensive scissors, including convex edges, hollow ground, and triple honed. The handles have the classic even handled design with a gold finger rest. Slender points for detail work.

Mfg By: Arius Eickert
Part ID: 8336

Normal list price: $150.00 The Eagle's popularity comes from the exchangeable finger rests which allow for right and left hand use. Cutting hair is smooth and easy with this shear’s slicing precision. Razor sharp bevel edges, hollow ground and triple hand honed. This phoenominal shear includes razor sharp convex edges that are triple hand honed on the inside. Perfect for all cutting methods, including slide cutting and wet or dry cutting!

Mfg By: Jaguar
Part ID: JG55

* Straight and offset design * Sharpness beyond the effects of time * Lasting, hand - honed, hollow - ground, beveled blades for enduring sharpness

Mfg By: Fromm
Part ID: FRM-8S

Mfg By: Fromm
Part ID: FRM-ES20

Mfg By: Fromm
Part ID: FRM-ES18

Mfg By: Fromm
Part ID: FRM-110

Hypoallergenic, permanent titanium infusion increases strength and cutting life. Hand-honed, beveled blades. Offset handles. 5½" with detachable finger rest.

Mfg By: Arius Eickert/Cutrite
Part ID: 8335

8335 Phoenix Offset handles with gold adjustable clicker plate screw assembly. Hollow ground and honed. This is a very popular pattern with all the features of the more expensive scissors!

Mfg By: Fromm
Part ID: 270

SALE!!! REGULARLY $180.00 Perfect balance of Japanese design and German technology. Easy click screw tension adjustment. Hand-honed, hollow-ground, semi-convex blades. Offset handles and ergonomic bent thumb ring. 5¼" with detachable finger rest.

Mfg By: Fromm
Part ID: FRM-80

Sleek profile with straight handle platform. Large finger and thumb rings. Hand-honed, hollow-ground , beveled blades. Semi-offset handles. Ergo insert. 5½" with detachable finger rest. Also available in 6¼" #83.

Mfg By: Fromm
Part ID: FRM-74L

Mfg By: Bonika
Part ID: BON-A7

This is the trend setter shear with the 7" length like you have seen on stage at classes by Redken, Scruples and others at the beauty shows. For volume cutting there is nothing like a 7" shear!

This is a quality Japanese steel and Japanese style edge that glides through the hair for a great balanced feel and great cut. It comes with a fully adjustable thumb nut and removeable finger rest. This shear was influenced by the talent of Frances London Dubose who we met at the MidWest Chicago last year. We struck up a friendship and she helped us design a shear that was priced reasonably yet performed to the expectations of a top notch creative hair artist like Frances. Thanks, Frances! You may see a few with her name on it at her booth at the next MidWest Beauty Show.

Mfg By: Bonika
Part ID: BON-Dx

Consistently, cut after cut you get sharpness and smoothness unmatched by other shears. We import these shears made with superior high rockwell Japanese steel to bring you the highest consistent quality.

Mfg By: Bonika
Part ID: BON-Ax

This is a favorite for those who slide cut. The "A” straight handle models are great if you cut both thumb up and thumb down. The A6 is recommended if you do barbering or scissor over comb techniques. The thin sharp blades make it great for slithering. The 5.5" teams great with the ATS thinning shear as a double shear. Super smooooth!

Mfg By: Bonika
Part ID: BON-DL50

Finally! Lefty's have a great 5" offset shear at a great price. We've had so many requests for a shear just like this one and we finally created one for you. This is a true left-handed shear ... in other words, it crosses backwards. This means you can cut effortlessly with less strain on your left hand.

Mfg By: Bonika
Part ID: BON-P8

The 8 inch length and wide blade makes quick work of tapered cuts that can create a great style in as few as seven snips of your blade. It makes it more comfortable and balanced for women and men with smaller hands.This shear is also a popular barber shear and dog grooming shear because of it's size.

Mfg By: Fromm
Part ID: FRM-90

The most popular Fromm Premium design. Ergonomically correct offset with elongated handle. Hand-honed, hollow-ground, beveled blades. Sterling finish. Adjustable set screw. 5½" with detachable finger rest. Also available in 6¼" #92

Mfg By: Fromm International
Part ID: FRM-1056

# 28-tooth thinner # Hand-honed, hollow ground, semi-convex blades # Offset handles # 5½" with detachable finger rest

Mfg By: Arius Eickert/Cutrite
Part ID: 8420

28 Tooth Blender. A smooth and gentle blending experience. A continuation of our popular Geisha line. Ergonomic offset handles with the thumb ring bent for comfort. Excellent for slide and wisp blending for great effects with bangs. Great for all around blending and texturizing techniques. Convex edges, triple hand honed and hollow ground. Gold adjustable split screw and fingerrest. Available in 6"

Mfg By: Arius Eickert/Cutrite
Part ID: 8435L

The 8435 Phoenix Blender is our most popular convex edge blender pattern and is now available in a 30 tooth true left handed version. It features Ergonomic offset handles with the thumb ring bent for comfort, an Adjustable Clicking Plate Assembly and Trumpet Finger Rest. The cut pattern is perfect for blending cut lines, thinning bangs and light texture work.

Mfg By: Fromm
Part ID: FRM-100

Sleek design featuring narrow point. Slim, curved, semi-offset handle. Oversized finger and thumb rings. Hand-honed, hollow-ground, semi-convex blades. 5" with detachable finger rest. Also available in 6" #102

Mfg By: Arius Eickert
Part ID: 8141T

The Fusion triple scissor set is deep hollow ground with honed blades. Sweeping ergonomic light weight alloyed handles. Gold finger pins and screws. Available in 5.75" only.

Mfg By: Bonika
Part ID: BON-T5

Chunker-type shears are notorious for either poor cutting with a choppy feel or if they cut well, they were ugly. Not so with the ProMaster T5!

5 teeth, each tooth 5 mm, each space 5 mm, removes 50% of the hair. Total length is 5.5”.

Mfg By: Fromm
Part ID: FRM-274L

Mfg By: Fromm
Part ID: FRM-275L

Mfg By: Bonika
Part ID: Bon-TWxxJ

Now, a moderate price shear for those who like to twist, turn and twirl ... This shear is great for getting into those hard to reach angles with ease and comfort to your wrists, shoulders and hands. Our new "Silk" model of the Twister is rugged enough for those who cut in a fast paced cutting environment. This is the Twister we recommend for high volume, heavy handed cutters. It has a little more feeling of control with a stiffer movement in the thumb pivot than our more expensive Twister.

Mfg By: Bonika
Part ID: BON-ETSx

This shear is ideal for a purchase with the 5.5" or 6" ProMaster shears. The 28 teeth will remove 40% of the hair giving a more subtle blend. This is the shear recommended by hair extensionist to give a blend of weave hair with natural hair. Try point cutting with them for a super natural effect. The screw is now an easy adjust screw.

Mfg By: Arius Eickert/Cutrite
Part ID: 8312

The top selling even handled convex scissor that we offer. Elegant and smooth cutting. Specifications: 440 Alloy Stainless Steel - Fully Forged. Even handle anatomical butterfly fingerrings (Both finger rings are comfort bent in opposite directions). Convexed edges. Triple honed hollow. Gold Adjustable Clicking Plate Assembly & Trumpet Finger Rest. Strengths: Convexed edge design make this pattern ideal for slide cutting and wisping.

Mfg By: Arius Eickert
Part ID: Monarch Special

Includes: #8312 Monarch Scissor Free! 8 PK Whirler Brushes Free! #5084 4 pc. Case

Mfg By: Bonika
Part ID: BON-Ex

Have you ever wanted your cutting to be effortless as if your shears were an extension of your hand?

When you require your shears to give you a precise detail cut or to slide cut, wouldn�t it be nice if your shears could perform effortless?

That�s what Bonika thought, too, and that is why they created the ProMaster Shears.

Starting with the blades, they used top quality stainless steel with molybdenum alloy and hand honed and hollowed ground them to a thin sharp convex edge blade. Next, they butterflyed the handles bending the finger rings in opposite directions to hug you fingers and thumb. Then they produced the handle in a non-slip finish, so even when your hands are covered with gel you will still feel in control. The clicking adjustable screw allows you to tighten down for large power blunt bites and loosen up for speed cutting without ever letting the shears leave your hand. When you palm them, as a professional stylist, you will appreciate and understand the workmanship that went into creating the harmonious lightweight balance of the ProMaster Shears.

Mfg By: Fromm
Part ID: FRM-145

Ergo handle design reduces fatigue and muscular tension. Patented rotating thumb-ring insert eliminates friction and rubbing. Expanded ring spread relaxes your hand. Offset handles. Fully integrated hollow-ground, convex blades. 5¾" with detachable finger rest.

Mfg By: Arius Eickert
Part ID: 8360

Normal list price: $270.00 The Swivel Thumb series of scissors is one of the hottest scissors world wide at this time. The Swivel Thumb gives the user total freedom of movement. The thumb is always in a natural postition, allowing your arm and elbow to stay in a natural position. VERY comfortable. This allows for better techniques and also guards against carpal tunnel. The total freedom of the thumb takes a lot of the thumb movement stress away from the hand. Highly recommended for stylists whos hands fatigue or have carpal problems. Specifications: 440 Surgical Stainless Steel. Hollow ground, triple honed and tempered. Convex edges for all around cutting including slide cutting and wisping.

Mfg By: Arius Eickert/Cutrite
Part ID: 8315AS

The Geisha family is the most popular design world wide. Versatile for all techniques including slide cutting, finishing and blunt cutting, it does it all! Ergonomic offset handles with the thumb ring bent for comfort. Convex edges, triple hand honed and hollow ground. The adjuster nob clicks and locks as you turn it. Specifications: 440 Alloy Stainless Steel - Fully Forged. Offset handle design. Convexed edges. Triple honed and deep hollow ground. Trumpet Finger Rest. Strengths: Convexed edge design make this pattern ideal for slide cutting and wisping.

Mfg By: Fromm
Part ID: FRM-175

Innovative arched design on a longer shear. Hand-honed, hollow-ground, convex blades. Offset handles. NEW, unique Perfect adjustable flush screw. Sterling Finish. 6½" with permanent finger rest

Mfg By: Fromm
Part ID: FRM-150

Mfg By: Fromm
Part ID: FRM-155

Mfg By: Fromm
Part ID: FRM-165

Mfg By: Arius Eickert/Cutrite
Part ID: 8360SW

The Swivel Thumb series of scissors is one of the hottest scissors world wide at this time. The Swivel Thumb gives the user total freedom of movement. The thumb is always in a natural postition, allowing your arm and elbow to stay in a natural position. VERY comfortable. This allows for better techniques and also guards against carpal tunnel. The total freedom of the thumb takes a lot of the thumb movement stress away from the hand. Highly recommended for stylists whos hands fatigue or have carpal problems. Specifications: 440 Surgical Stainless Steel. Hollow ground, triple honed and tempered. Convex edges for all around cutting including slide cutting and wisping.

Mfg By: Arius Eickert/Cutrite
Part ID: 8360

The Swivel Thumb series of scissors is one of the hottest scissors world wide at this time. The Swivel Thumb gives the user total freedom of movement. The thumb is always in a natural postition, allowing your arm and elbow to stay in a natural position. VERY comfortable. This allows for better techniques and also guards against carpal tunnel. The total freedom of the thumb takes a lot of the thumb movement stress away from the hand. Highly recommended for stylists whos hands fatigue or have carpal problems.

Mfg By: Fromm
Part ID: FRM-140

40-tooth thinner. Hypoallergenic, permanent titanium infusion increases strength and cutting life. Hand-honed, hollow-ground blades. Opposing handles. 5½" with detachable finger rest.

Mfg By: Jaguar
Part ID: JG833

* Offset or straight handle design * Keen razor - soft cutting * Hand - honed, hollow - ground, convex blades for extreme sharpness * Patented flush screw system for perfect tension control

Mfg By: Fromm
Part ID: FRM-255

Mfg By: Fromm
Part ID: FRM-256

Mfg By: Bonika
Part ID: BON-Kaleidoscope Set

The lovely rainbow titanium coating protects the Japanese stainless steel shears from rust and the elements. Each shear is slightly different in the configuration of colors which makes it unique and recognizable your own shear. Both the shear and the matching thinner come with a purple adjustable thumb screw which allows you to adjust the tension of the shears instantaneously without using extra tools. These are light weight with a slight bend to the handles making them so comfortable to hold. The shear is 5.5" long and the thinner is 6". # Free 6 pocket case # Life Time Warranty # 30 Day Satisfaction guaranteed return policy # 1 Year Accidental Damage Policy # And the pride of owning a genuine Bonika Shear you will want to use with every haircut.

Mfg By: Fromm
Part ID: FRM-260

Mfg By: Fromm
Part ID: FRM-332

Mfg By: