Mfg By: Arius Eickert/Cutrite
Part ID: 8522

Iris Scissors Stainless forged steel, finely ground pointed tips. 8522 is pictured. Ideal for close tolerance cutting, lab, electronics, embroidery. #8522C-3 3 1/2” Curved Blade #8522 4” Straight Blade; #8522C 4” Curved Blade 1 1/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 4733

4733 Double Sided Foot Sander is flexible yet stiff. Made in Germany. Used for sanding corns and callouses on the bottom of feet. This sander has two abrasive pads attached to a durable plastic handle. The pads are a medium/Fine grit, good for finishing off course work done with the 8566 above.

Mfg By: Arius Eickert/Cutrite
Part ID: 3103

#3103 6.75" Thinning, Shaving & Shaping Tool, Plastic. This tool can be used to create shape in bangs, thin thick hair and blend step marks in straight hair. For replacement blades use the Arius-Eickert #3401 blades. #3401 blade included with razor.

Mfg By: Arius Eickert/Cutrite
Part ID: 8067

Heavy Duty Bandage Shear This offset, heavy duty paramedics shear was designed and engineered for the U.S. Army Medical Corps. These shears will cut anything from gauze to .035” copper wire. Heavy serration on one blade for no slip. Large Polypropylene handles. Stamped stainless steel blades. Wet or dry use for tape, bandages, canvas, strapping, etc.

Available in:
#8067 7” - 1 7/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8569

#8569 Pumice Sponge/Nail Brush Combo. Made in Germany. Clean and smooth your hands with this Pumice/Nail brush combo. The Pumice works on smoothing callous and cleaning grease and dirt from the natural wrinkles and folds in your hands. Follow up with the brush and clean under the nails.

Mfg By: Arius Eickert/Cutrite
Part ID: 8224

Stainless Pointed Scissor Stainless stamped scissor with plastic comfort handles. Large finger rings. Industrial grade 0.100” thick blades. Ideal for trimming, notching, cutting cordage. Add KS for KevlarTM thread applications, etc. Available in #8224-5.25” 2 3/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 4731

Used to smooth callous, corns, rough skin on the hands and feet. The holes in the #4731 keeps dried skin from clogging the rasp.

Mfg By: Arius Eickert/Cutrite
Part ID: 3105

#3105-M Razor, Shaper. Stainless, 2 1/4" Cut. Thinning, Shaving & Shaping Tool. This tool can be used to create shape in bangs, thin thick hair and blend step marks out of straight hair. Texturizing safety sleeve can be removed, exposing the razor blade in order to shave the neckline. For replacement blades use the Arius-Eickert #3405 crimped back persona blades. #3405 blade included with razor.

Mfg By: Arius Eickert/Cutrite
Part ID: 8255

Comfort Stainless Pocket Scissor Big bow (finger holes) Commercial grade stainless stamped scissor with plastic comfort handles. Economically priced. Ideal for threads, yarns, paper, etc. Available in #8255 5” - 2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8010

Comfort Pointed Scissor Stainless steel stamped scissors with molded poly-comfort handles. 0.155” thick blades. Ideal for fibers, thread, paper, etc. Available in #8010 5” - 2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: xxxx2

Large finger rings make this a very comfortable scissor. Great for china silk wraps and cuticle cutting. Very fine and sharp points. Comes in curved or straight blades. High carbon, nickel plated. Blunted tips option is good for mustache, beard and nosehair cutting.

Mfg By: Arius Eickert/Cutrite
Part ID: 8564

#8564 Pumice Sponge/Footfile Combo, Made in Germany. The 8564 double sided callus file combo will make your feet sigh with relief and your hands feel soft. Use the pumice first and then follow up with the foot file. Makes your feet and hands nice and smooth.

Mfg By: Arius Eickert/Cutrite
Part ID: 4793

#4793 Single Loop Commodone Extractor. The loop does a good job extracting blackheads minimizing marks on the skin.

Mfg By: Arius Eickert/Cutrite
Part ID: 5303

5303 -1 Pocket Holster Holds up to 8” tools. CutRite Holsters are produced from heavy top grain steer hide. Securely stitched and riveted, so that pointed tools will not penetrate. Loop over belt and snap fasten. OSHA approved for safety.

Mfg By: Arius Eickert/Cutrite
Part ID: 8240

Economy Bent Trimmer Stainless steel 0.090” thick blades. Good for commercial paper and light cloth cutting.

Available in:
#8240 8” - 3 1/2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 4734

#4734 Pumice Sponge. Made in Germany. Quality Pumice sponge will not crumble apart when wet. Used for smoothing callous and corns from hands and feet. Also good for cleaning grease and other oily stains which are in the folds and wrinkles of hands. Pack of 3 for $10.00. Normal price is $4.00 each.

Mfg By: Arius Eickert/Cutrite
Part ID: 6071

The Arius-Eickert 6071 - 8" Rat Tail Comb is good for all cutting techniques and hair braiding. Arius-Eickert professional aluminum combs are 100% hand finished, with each tooth being individually cut. This guarantees no burrs, so that the hair does not snag in the comb. The combs are made from the highest grade tempered aluminum, which is: - Impervious to chemicals. - Anti-Static - Unbreakable A must for professional stylists. Made in Sweden.

Mfg By: Arius Eickert/Cutrite
Part ID: 6073

The Arius-Eickert 6073 7" Haircutting / tapering comb is an excellent all around comb for general use. The teeth are not as deep as the 6079 Fingerwave comb, but has the same spacing. Arius-Eickert professional aluminum combs are 100% hand finished, with each tooth being individually cut. This guarantees no burrs, so that the hair does not snag in the comb. The combs are made from the highest grade tempered aluminum, which is: - Impervious to chemicals. - Anti-Static - Unbreakable A must for professional stylists. Made in Sweden.

Mfg By: Arius Eickert/Cutrite
Part ID: 6079

The Arius-Eickert 6079 - 8" Fingerwave / Grooming Comb is well balanced for finger waving techniques and all around combing. Arius-Eickert professional aluminum combs are 100% hand finished, with each tooth being individually cut. This guarantees no burrs, so that the hair does not snag in the comb. The combs are made from the highest grade tempered aluminum, which is: - Impervious to chemicals. - Anti-Static - Unbreakable A must for professional stylists. Made in Sweden.

Mfg By: Arius Eickert/Cutrite
Part ID: 6076

The Arius-Eickert 6076 - 8" Rat Tail Teaser Comb is an excellent all around comb for pulling out sections of hair with the tail portion. The teeth are uneven lengths for teasing, without breaking the hair. Arius-Eickert professional aluminum combs are 100% hand finished, with each tooth being individually cut. This guarantees no burrs, so that the hair does not snag in the comb. The combs are made from the highest grade tempered aluminum, which is: - Impervious to chemicals. - Anti-Static - Unbreakable A must for professional stylists. Made in Sweden.

Mfg By: Arius Eickert/Cutrite
Part ID: 6077

The Arius-Eickert 6077 - 8" Skiptooth Teaser Comb has double wide spaced teeth on one side for teasing the hair without breakage. The teeth on the other half are normally spaced for regular combing. Arius-Eickert professional aluminum combs are 100% hand finished, with each tooth being individually cut. This guarantees no burrs, so that the hair does not snag in the comb. The combs are made from the highest grade tempered aluminum, which is: - Impervious to chemicals. - Anti-Static - Unbreakable A must for professional stylists. Made in Sweden.

Mfg By: Arius Eickert/Cutrite
Part ID: 6082

The Arius-Eickert 6082 - 6" Pocket Comb is an excellent carrying comb for all around use. Small and well balanced. Arius-Eickert professional aluminum combs are 100% hand finished, with each tooth being individually cut. This guarantees no burrs, so that the hair does not snag in the comb. The combs are made from the highest grade tempered aluminum, which is: - Impervious to chemicals. - Anti-Static - Unbreakable A must for professional stylists. Made in Sweden.

Mfg By: Arius Eickert/Cutrite
Part ID: 5302

5302 -1 Pocket Holster Holds up to 9” tools. CutRite Holsters are produced from heavy top grain steer hide. Securely stitched and riveted, so that pointed tools will not penetrate. Loop over belt and snap fasten. OSHA approved for safety.

Mfg By: Arius Eickert/Cutrite
Part ID: 2608

3.5" Stork Scissor, Used for nailwrap, china silk, and embroidery. Made in Europe. Beautiful gold plating. Looks good and cuts great!

Mfg By: Arius Eickert/Cutrite
Part ID: 4794

#4794 Professional Double Loop Commodone Extactor, Stainless. Double loop extractor has a fine wire loop for deep pushing of blackheads, and a flatter end loop to remove blackheads minimizing bruising and skin irritation. A favorite among esthiticians.

Mfg By: Arius Eickert/Cutrite
Part ID: 5320

5320 -1 Large Pocket Holster Holds up to 12” tools. CutRite Holsters are produced from heavy top grain steer hide. Securely stitched and riveted, so that pointed tools will not penetrate. Loop over belt and snap fasten. OSHA approved for safety.

Mfg By: Arius Eickert/Cutrite
Part ID: 8222

Open Bow Curved Iris Scissors Stamped stainless steel with vinyl coated handles that open and close to fit any thumb or finger. Precision tips. One edge is serrated. Long life, excellent steel. Ideal for close tolerance cutting, embroidery, fly tying, etc. (8222C 4” is pictured) #8222C-3 3” Curved Blade; #8222C 4” Curved Blade 7/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 5305

5305 -3 Pocket and Loop Holster Holds up to 9” tools. CutRite Holsters are produced from heavy top grain steer hide. Securely stitched and riveted, so that pointed tools will not penetrate. Loop over belt and snap fasten. OSHA approved for safety.

Mfg By: Arius Eickert/Cutrite
Part ID: 5306

5306 -3 Pocket Holster Holds up to 10” tools. Includes a reed tool pocket. CutRite Holsters are produced from heavy top grain steer hide. Securely stitched and riveted, so that pointed tools will not penetrate. Loop over belt and snap fasten. OSHA approved for safety.

Mfg By: Arius Eickert/Cutrite
Part ID: xxxx

The very fine tips spire tips, with the reinforced thicker blade make this one of our most popular cuticle scissors. Curved blades. High carbon steel, nickle plated. The blunted tip option is ideal for baby nail cutting. For a heavier version, refer to the medium weight 2601 scissor.

Mfg By: Arius Eickert/Cutrite
Part ID: 2708

The very fine tips spire tips, with the reinforced thicker blade make this one of our most popular cuticle scissors. Curved blades. High carbon steel, nickle plated. The blunted tip option is ideal for baby nail cutting. For a heavier version, refer to the medium weight 2601 scissor.

Mfg By: Arius Eickert/Cutrite
Part ID: 2605

Large finger rings make this a very comfortable scissor. Great for china silk wraps and cuticle cutting. Very fine and sharp points. Comes in curved or straight blades. High carbon, nickel plated. Blunted tips option is good for mustache, beard and nosehair cutting.

Mfg By: Arius Eickert/Cutrite
Part ID: 9165

Electrician/Heavy Yarn Scissor 9165N Electrician Scissor with Notches Electrician scissor with tool scrape and file on the back edge of the blade. Stripping notches for 19 and 23 gauge wire on tone back of 9165N. Heavy blades. Good for KevlarTM when serrated. Ideal for wire splicing, harness ties, coarse yarn, plastics, rubber, etc.

Available in:
#9165 5” - 1 3/4” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8235

Stainless Curved Blade Scissor Very smooth running scissor. Fine edges and sharp tips. Ideal for fibres, thread, yarn, embroidery. #8235 Straight Blade; #8235C Curved Blade 5 1/4” - 2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 9174

Heavy Duty Sewing Scissor Double pointed scissor that is great for finishing work. Ideal for delicate precise work with crewel, lace and threads.

Available in:
#9174 4” - 1 1/2” Cut
#9175 5” - 2 1/2” Cut
#9176 6” - 2 3/4” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 9144

Heavy Duty Pocket Scissor High carbon forged pocket scissor with safety points. Protects against injury and damage to clothing. Sturdy blades permit heavy cutting. Ideal for thread, yarn processing, knitting and weaving mills. Available in #9144 4” - 1 3/4” Cut 9145 5” - 2 1/2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 2606

This is a very heavy duty nail scissor good for cutting fiber wraps, nails and general use. Curved blades. High carbon steel, nickle plated.

Mfg By: Arius Eickert/Cutrite
Part ID: 9185

Heavy Duty Sewing Scissor Sharp and blunt points give the strength of a blunt tip, with the accuracy of a sharp point. One pointed tip for ripping, the other rounded to prevent snagging. Ideal for small patterns, etc. Available in #9185 5” - 2 1/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 5333

5333 -3 Pocket Holster Holds up to 12” tools. CutRite Holsters are produced from heavy top grain steer hide. Securely stitched and riveted, so that pointed tools will not penetrate. Loop over belt and snap fasten. OSHA approved for safety.

Mfg By: Arius Eickert/Cutrite
Part ID: 8254

Stainless Pocket Scissor Premium stainless steel scissor with vinyl coated handles. Tough and rust resistant. Ideal for yarns and thread filaments. Available in #8254 4 3/8” - 2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 2615

Professional Nose, Ear and Mustache scissor. Curved blade with safety point. High carbon steel, nickel plated. Made in Europe.

Mfg By: Arius Eickert/Cutrite
Part ID: 9162

Winder’s Shear Winder’s shears, also known as gold foil shears. Extra long handles with very thin blades. Reach into areas where other shears cannot fit. Great control when cutting laps on Autoconer and other winders. Ideal for glass and aramid fibers, light filaments, threads, yarns, Spectra TM, etc.

Available in:
#9162 7” - 1 3/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 91xx

Forged Straight Trimmers. Ideal for general cutting. Adjustable screw and nut assembly. Also available with curved blades.

Mfg By: Arius Eickert/Cutrite
Part ID: 700

The 700 Tanto Folding Knife has a very sharp angled bevel edged blade, that locks into the open position. The aluminum handle is very light and thin and is available in the silver satin finish. This knife is the mini version of the 701 Tanto Folding Knife and easily fits onto a key chain. The edge geometry is good for overall daily use, including opening boxes, cutting leather and wires, etc. Blade length: 2 1/2" AUS8 Stainless Steel with a hardness of ~56 Rockwell C.

Mfg By: Arius Eickert/Cutrite
Part ID: 9269L

Normal list price: $23.12 Heavy Duty High Leverage Shears The most versatile shear in our line. The best shear for tough applications for modern synthetics such as KevlarTM, etc. Forged out of tough chrome-moly steel. For carpet applications, 9269L handles are bent to the left for LEFT HANDERS . We recommend to add a heavy serration for synthetic uses.

Mfg By: Arius Eickert/Cutrite
Part ID: 911x

Bent Trimmers Ideal for short cuts and trimming. Hands stay out of the way! Adjustable screw and nut assembly.

Available in:
#9116 6” - 2 3/4” Cut
#9117 7” - 3 1/4” Cut
#9118 8” - 4” Cut
#9119 9” - 4 3/8” Cut
#9110 10” - 4 3/4” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 5080

All leather holster for around the waist or over the shoulder. 4 sleeves for scissors and combs. Snap on belt. Wear the holster with the cover flap behind the holster, so it is out of the way while you work!

Mfg By: Arius Eickert/Cutrite
Part ID: 9268

Extra High Leverage CrMoly Shear A high leverage shear with a shorter cut than the 9269. Good for tough cutting applications. Forged out of chrome-moly steel. Ideal for cordage, laminates, light wires, etc.

Available in:
#9268 7 3/4” - 2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 9127

Medium Duty High Leverage Shears Also available with bent handles. 9127L handles bent to the left for LEFT HANDERS and 9127R bent to the right for right handers. Ideal for rugs, nap of carpets and other industrial uses.

Available in:
#9127 7 1/2” - 2 1/4” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8100

Cardinal Comfort Shear Available in 4.5", 5", 5" Lefty, or 6"

Mfg By: Arius Eickert/Cutrite
Part ID: 9269

Heavy Duty High Leverage Shears The most versatile shear in our line. The best shear for tough applications for modern synthetics such as KevlarTM, etc. Forged out of tough chrome-moly steel. For carpet applications, 9269R handles are bent to the right and 9269L handles are bent to the left for LEFT HANDERS . We recommend to add a heavy serration for synthetic uses.

Available in:
#9269 8 1/2” - 3” Cut
#9269R Shanks bent Right
#9269L Shanks bent Left.

Mfg By: Arius Eickert/Cutrite
Part ID: 8225

Soft Grip Shears Tough Stainless Steel blades with flexible high impact rubber handles. Light and comfortable. Stainless screw and nut assembly. Excellent for high fatigue and repetitive jobs. 0.115” blade thickness. Ideal traditional dress maker pattern, good wet process shear.

Available in #8225 8” - 3 1/2” Cut
#8225L 8” LEFTY

Mfg By: Arius Eickert/Cutrite
Part ID: 9167

Light Metal Shear Extremely high leverage, light metal shears. Easy to control for close accurate trimming. Ideal for a variety of materials, including rubber, heavy fabrics, floral, etc.

Available in:
#9167 7” - 1 3/8” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8227

Extra Large Hole Soft Grip Shears The 8227 is the same as the 8225, except that these shears have an extra large hand hole. Great for large hands and applications where gloves are needed.

Available in:
#8227-8 8” - 3 1/2” Cut
#8227-9 9” - 4 1/2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8228

Dura Handle Shears 440C Stainless steel trimmer with extra large finger holes. One of the hardest shears on the market with a harness of 58-60 Rc! Tough and light weight. Add KS to the part number for Kevlar TM and Spectra TM cutting applications.

Available in #8229-9 9 1/2” - 4 1/2” Cut AVAILABLE IN 9" ONLY & SOON TO BE GONE!!

Mfg By: Arius Eickert/Cutrite
Part ID: 8230

Heavy Duty Bent Trimmer The classic crane handle design of the Cobra is a favorite among platform artists. This scissor's durable stainless steel allows it to cut through all types of hair with ease. Convex edges, triple hand honed and hollow ground. (Best Seller)

Available in:
#8230 10 1/2” - 4 1/2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 9160

Ball Point Shear High leverage shear with a forged ball point. The blades come apart for easy cleaning. Ideal for processing poultry or meat products. The ball point prevents injury of skin, when cutting bandages or casts. Many applications.

Available in:
#9160 8 1/2” - 3” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 8243

Soft Tough Ergonomic Shear Self opening shear. Good for light fabric and paper cutting applications.

Available in #8243 10” - 3 1/4” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 9144SW

Ergonomic Carpal Pocket Scissors The revolutionary Carpal ScissorTM alleviates many of the symptoms that can cause Tendinitis & Carpal Tunnel Syndrome! The user has total freedom of the thumb, allowing it to move in a natural and ergonomic motion. This reduces the stress on the ligaments. Available in #9144SW 4”, 5” and 6”.

Mfg By: Arius Eickert/Cutrite
Part ID: 704

The 704 Tanto Blade Folding Pocket Knife has a very sharp angled bevel edged blade, that locks into the open position. The knife is very easy to open with one hand, because of the large thumb knob located at the base of the blade. The solid black handle is extra long and very comfortable for large hands, measuring 5 1/2". There is a pocket clip on the handle for easy clipping to your pocket or boot. The edge geometry is good for overall daily use, including opening boxes, cutting leather and wires, etc. Overall closed length: 5 1/2" Blade length: 3 3/4" 440C Stainless Steel with a hardness of ~54 Rockwell C.

Mfg By: Arius Eickert/Cutrite
Part ID: 91xx

Heavy Duty Straight Trimmers Ideal for heavy textiles, canvas, plastic, fiberglass, rubber, etc. Adjustable bolt and nut assembly. Modify with knife edge for easier cutting of heavy items with less effort!

Mfg By: Arius Eickert/Cutrite
Part ID: 911xH

Bent Heavy Duty Trimmers Ideal for heavy textiles, canvas, plastic, fiberglass, rubber, etc. Adjustable bolt and nut assembly.

Available in:
#9110H 10” - 4 3/8” Cut
#9112H 12” - 6” Cut
#9112H-GOLD 12" 24k Gold Plated Ceremony & Ribbon Cutting Scissors

Mfg By: Arius Eickert/Cutrite
Part ID: 8118

The 8118 is one of the best bargains that we offer. 420 forged surgical stainless steel, which is ice tempered for extra toughness. One edge is serrated for holding the hair, wet or dry. Excellent for layer and blunt cuts. Comes with a black rubber silencer. Available with removable finger rest: 4.5", 5", 5.5", 5.5" LEFTY, 5.5" Curved, 6", 6" Curved, 6.5", 6.5" Curved Available with forged-on finger rest: 8", 8" Curved, 10", 10" Curved

Mfg By: Arius Eickert/Cutrite
Part ID: 911xSW

Bent Trimmer Carpal Shears The revolutionary Carpal ShearTM alleviates many of the symptoms that can cause Tendinitis & Carpal Tunnel Syndrome! The user has total freedom of the thumb, allowing it to move in a natural and ergonomic motion. Reduces stress on ligaments.

Available in Ring Sizes 9 & 13 and Normal, Blunt and Filistered Tips:
#9116SW 6” - 2 3/4” Cut
#9118SW 8” - 4” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 9669

Pattern Shear High carbon steel, bright nickel plated with nut and bolt assembly. Ideal for clothes patterns, cloth and light plastic.

Available in:
#9669 12” - 3 1/2” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 701

The 701 Tanto Blade Folding Pocket Knife has a very sharp angled bevel edged blade, that locks into the open position. The knife is very easy to open with one hand, because of the large thumb knob located at the base of the blade. The opening/closing action is very smooth. The aluminum handle, with rubber inserts, is available in the silver satin finish shown or solid black. There is a pocket clip on the handle and the knife fits very comfortably in the hand. This knife is one of my favorites, because of the overall design. The edge geometry is good for overall daily use, including opening boxes, cutting leather and wires, etc. Overall closed length: 4 5/8" Blade length: 3 3/8" Rockwell C: ~54

Mfg By: Arius Eickert/Cutrite
Part ID: 710

A truly beautiful knife. The 710 Tactical Knife's blade is black Teflon coated with a Black anodized Aluminum handle. The very sharp angled bevel edged blade is made out of our best AUS-8A stainless steel, that combines hardness and toughness! The blade locks into the open position. There is a pocket clip on the handle and the knife fits very comfortably in the hand. This knife is one of our best sellers and sought by collectors and professionals. Overall closed length: 4 1/2" Blade length: 3 1/2" AUS-8A Stainless Steel with a hardness of ~58 Rockwell C.

Mfg By: Arius Eickert/Cutrite
Part ID: 4795

#4745 Commodone Extractor with Lance, Stainless, Retractable. A professional instrument used by Aestheticians for deep blackheads. One end has a stainless surgical sharp lance for poking the skin to reach the infected black head. The other end has a small open ended cup and is used for pushing out blackheads.

Mfg By: Arius Eickert/Cutrite
Part ID: 8143

The 8143 Tango scissors have butterfly ergonomic handles making this shear a great tool that feels comfortable all day long! The two piece blade and slotted screw system is composed of stamped 440 Stainless blades and cast handles which allow sharp, smooth usage.

Mfg By: Arius Eickert/Cutrite
Part ID: 8141

Razor sharp edges with a deep hollow grind for a super smooth cut and run. Offset ergonomic handles for comfort. Good for all haircutting styles, wet or dry. Stamped high carbon 420 Stainless Steel blades for durability. Contour cast handles for comfort.

Mfg By: Arius Eickert/Cutrite
Part ID: 8331

Feel the smooth precision of this scissor! Convex edges, triple hand honed and hollow ground.

Mfg By: Arius Eickert/Cutrite
Part ID: 9270SW

Ergonomic Carpal Shear The revolutionary Carpal ShearTM alleviates many of the symptoms that can cause Tendinitis & Carpal Tunnel Syndrome! The user has total freedom of the thumb, allowing it to move in a natural and ergonomic motion. Reduces the stress on ligaments.

Available in:
#9270SW 9” -3” Cut

Mfg By: Arius Eickert/Cutrite
Part ID: 1480

Spiking, chunking, texturizing. Add life, body and texture into hairstyles. This 5.5" - 5 tooth scissor achieves a higher effect for dramatic texture. A unique and exciting addition to your professional styling tools.

Mfg By: Arius Eickert/Cutrite
Part ID: 1000

Used by professionals for scissor over comb cutting techniques. Fully forged from a very light and highly alloyed Vanadium Stainless Steel, these scissors have very tough, long lasting cutting edges. One blade has a polished NIFE EDGETM, the other is micro-serrated for extra hold. Our top of the line German style scissor. Available in: 1009-5", 1010-5.5", 1011-6", 1012-6.5", 1013-7", 1303-5.5" LEFTY. The 1011, 1012 & 1013 are very popular barbering shears.

Mfg By: Arius Eickert/Cutrite
Part ID: Gemini Special

8337 Feel the precision edge of these convex scissors. Available in: 5.5" Receive FREE Gemini Blender and 4 pc. scissor case.

Mfg By: Arius Eickert/Cutrite
Part ID: 8330

Shear delight to cut with and also great on the pocket book! All the features of the more expensive scissors, including convex edges, hollow ground, and triple honed. The handles have the classic even handled design with a gold finger rest. Slender points for detail work.

Mfg By: Arius Eickert/Cutrite
Part ID: 8335

8335 Phoenix Offset handles with gold adjustable clicker plate screw assembly. Hollow ground and honed. This is a very popular pattern with all the features of the more expensive scissors!

Mfg By: Arius Eickert/Cutrite
Part ID: 8420

28 Tooth Blender. A smooth and gentle blending experience. A continuation of our popular Geisha line. Ergonomic offset handles with the thumb ring bent for comfort. Excellent for slide and wisp blending for great effects with bangs. Great for all around blending and texturizing techniques. Convex edges, triple hand honed and hollow ground. Gold adjustable split screw and fingerrest. Available in 6"

Mfg By: Arius Eickert/Cutrite
Part ID: 8435L

The 8435 Phoenix Blender is our most popular convex edge blender pattern and is now available in a 30 tooth true left handed version. It features Ergonomic offset handles with the thumb ring bent for comfort, an Adjustable Clicking Plate Assembly and Trumpet Finger Rest. The cut pattern is perfect for blending cut lines, thinning bangs and light texture work.

Mfg By: Arius Eickert/Cutrite
Part ID: 8312

The top selling even handled convex scissor that we offer. Elegant and smooth cutting. Specifications: 440 Alloy Stainless Steel - Fully Forged. Even handle anatomical butterfly fingerrings (Both finger rings are comfort bent in opposite directions). Convexed edges. Triple honed hollow. Gold Adjustable Clicking Plate Assembly & Trumpet Finger Rest. Strengths: Convexed edge design make this pattern ideal for slide cutting and wisping.

Mfg By: Arius Eickert/Cutrite
Part ID: 8315AS

The Geisha family is the most popular design world wide. Versatile for all techniques including slide cutting, finishing and blunt cutting, it does it all! Ergonomic offset handles with the thumb ring bent for comfort. Convex edges, triple hand honed and hollow ground. The adjuster nob clicks and locks as you turn it. Specifications: 440 Alloy Stainless Steel - Fully Forged. Offset handle design. Convexed edges. Triple honed and deep hollow ground. Trumpet Finger Rest. Strengths: Convexed edge design make this pattern ideal for slide cutting and wisping.

Mfg By: Arius Eickert/Cutrite
Part ID: 8360SW

The Swivel Thumb series of scissors is one of the hottest scissors world wide at this time. The Swivel Thumb gives the user total freedom of movement. The thumb is always in a natural postition, allowing your arm and elbow to stay in a natural position. VERY comfortable. This allows for better techniques and also guards against carpal tunnel. The total freedom of the thumb takes a lot of the thumb movement stress away from the hand. Highly recommended for stylists whos hands fatigue or have carpal problems. Specifications: 440 Surgical Stainless Steel. Hollow ground, triple honed and tempered. Convex edges for all around cutting including slide cutting and wisping.

Mfg By: Arius Eickert/Cutrite
Part ID: 8360

The Swivel Thumb series of scissors is one of the hottest scissors world wide at this time. The Swivel Thumb gives the user total freedom of movement. The thumb is always in a natural postition, allowing your arm and elbow to stay in a natural position. VERY comfortable. This allows for better techniques and also guards against carpal tunnel. The total freedom of the thumb takes a lot of the thumb movement stress away from the hand. Highly recommended for stylists whos hands fatigue or have carpal problems.